View MN102H74G_349804.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

MN102H74D, MN102H74F, MN102H74G
Type ROM (x8-bit) x RAM (x 8-bit) x Package Minimum Instruction Execution Time Interrupts
With main clock operated MN102H74D 64 K 4K MN102H74F 96 K 4K LQFP100-P-1414 *Lead-free 83.3 ns (at 3.0 V to 3.6 V, 12 MHz) MN102H74G 128 K 4K
* RST pin * Watchdog * NMI pin * Timer counter 0 to 9 underflow * Timer counter 10 to 13 under/overflow * Timer counter 10 to 13 compare capture A * Timer counter 10 to 13 compare capture B * ATC ch.0 to 3 transfer finish * External 0 to 5 * Serial ch.0 to 3 transmission * Serial ch.0 to 3 reception * A/D conversion finish * USB general-purpose * USBSOF * USB end points 1 to 8 Conforms to USB1.1. USB transceiver built-in Full-speed (12 Mbps) supported. 9 end points (FIFO built-in independently) FIFO size (EP0, 1, 2, 3, 4, 5, 6, 7, 8): 64, 128, 128, 128, 128, 128, 128, 128, 128 bytes * EP0 Control transfer IN/OUT (two ways) * EP1 to EP8 Interrupt/Bulk/Isochronous transfer supported. Settable to IN or OUT. Double Buffering function supported. When the MAXP size is set to a half or less of the MAXFIFO size for each EP, the Double Buffering function is made valid automatically. Timer counter 0: 8-bit x 1 (timer output, event count, timer interrupt) Clock source ********************* SYSCLK; XI; prescaler 0; TM0IO pin Interrupt source **************** Timer counter 0 underflow Timer counter 1: 8-bit x 1 (timer output, event count, timer interrupt) Clock source ********************* SYSCLK; prescaler 0; TM1IO pin Interrupt source **************** Timer counter 1 underflow Connectable Timer counters 0 to 1
USB Functions
Timer Counter
Timer counter 2: 8-bit x 1 (timer output, event count, timer interrupt, A/D conversion start) Clock source ********************* SYSCLK; 1/8 of SYSCLK; 1/32 of SYSCLK; timer counter 3 underflow; timer counter 4 underflow; TM2IO pin Interrupt source **************** Timer counter 2 underflow Timer counter 3: 8-bit x 1 (timer output, event count, timer interrupt) Clock source ********************* SYSCLK; 1/8 of SYSCLK; 1/32 of SYSCLK; timer counter 2 underflow; timer counter 4 underflow; TM3IO pin Interrupt source **************** Timer counter 3 underflow Timer counter 4: 8-bit x 1 (timer output, event count, timer interrupt) Clock source ********************* SYSCLK; 1/8 of SYSCLK; 1/32 of SYSCLK; timer counter 2 underflow; timer counter 3 underflow; TM4IO pin Interrupt source **************** Timer counter 4 underflow
1
MAE00011DEM
MN102H74D, MN102H74F, MN102H74G
Timer Counter (Continue)
Timer counter 5: 8-bit x 1 (timer output, event count, timer interrupt) Clock source ********************* SYSCLK; 1/8 of SYSCLK; 1/32 of SYSCLK; timer counter 2 underflow; timer counter 3 underflow; timer counter 4 underflow; TM5IO pin Interrupt source **************** Timer counter 5 underflow Connectable Timer counters 2 to 5
Timer counter 6: 8-bit x 1 (timer output, event count, timer interrupt, serial clock generation) Clock source ********************* SYSCLK; 1/8 of SYSCLK; 1/32 of SYSCLK; timer counter 7 underflow; timer counter 8 underflow; TM6IO pin Interrupt source **************** Timer counter 6 underflow Timer counter 7: 8-bit x 1 (timer output, event count, timer interrupt, serial clock generation) Clock source ********************* SYSCLK; 1/8 of SYSCLK; 1/32 of SYSCLK; timer counter 6 underflow; timer counter 8 underflow; TM7IO pin Interrupt source **************** Timer counter 7 underflow Timer counter 8: 8-bit x 1 (timer output, event count, timer interrupt, serial clock generation) Clock source ********************* SYSCLK; 1/8 of SYSCLK; 1/32 of SYSCLK; timer counter 6 underflow; timer counter 7 underflow; TM8IO pin Interrupt source **************** Timer counter 8 underflow Timer counter 9: 8-bit x 1 (timer output, event count, timer interrupt) Clock source ********************* SYSCLK; 1/8 of SYSCLK; 1/32 of SYSCLK; timer counter 6 underflow; timer counter 7 underflow; timer counter 8 underflow; TM9IO pin Interrupt source **************** Timer counter 9 underflow Connectable Timer counters 6 to 9
Timer counter 10: 16-bit x 1 (timer output, event count, input capture, PWM output, 2-phase encoder input) Clock source ********************* SYSCLK; 1/8 of SYSCLK; timer counter 2 or 3 underflow; 2-phase encoding of TM10IOA/TM10IOB pin (1x, 4x); TM10IOB pin Interrupt source **************** Timer counter 10 under/overflow; timer counter 10 compare capture A; timer counter 10 compare capture B Timer counter 11: 16-bit x 1 (timer output, event count, input capture, PWM output, 2-phase encoder input) Clock source ********************* SYSCLK; 1/8 of SYSCLK; timer counter 8 or 9 underflow; 2-phase encoding of TM11IOA/TM11IOB pin (1x, 4x); TM11IOB pin Interrupt source **************** Timer counter 11 under/overflow; timer counter 11 compare capture A; timer counter 11 compare capture B Timer counter 12: 16-bit x 1 (timer output, event count, input capture, PWM output, 2-phase encoder input) Clock source ********************* SYSCLK; 1/8 of SYSCLK; timer counter 4 or 5 underflow; 2-phase encoding of TM12IOA/TM12IOB pin (1x, 4x); TM12IOB pin Interrupt source **************** Timer counter 12 under/overflow; timer counter 12 compare capture A; timer counter 12 compare capture B Timer counter 13: 16-bit x 1 (timer output, event count, input capture, PWM output, 2-phase encoder input) Clock source ********************* SYSCLK; 1/8 of SYSCLK; timer counter 6 or 7 underflow; 2-phase encoding of TM13IOA/TM13IOB pin (1x, 4x); TM13IOB pin Interrupt source **************** Timer counter 13 under/overflow; timer counter 13 compare capture A; timer counter 13 compare capture B
See the next page for electric characteristics, pin assignment, and support tool.
MAE00011DEM
2
Serial Interface
Serial 0: 8-bit x 1 (transfer direction of MSB/LSB selectable; transmission / reception of 7, 8-bit length) Clock source ******************* 1/2 or 1/16 of timer counter 6 underflow; external pin Serial 1: 8-bit x 1 (transfer direction of MSB/LSB selectable; transmission / reception of 7, 8-bit length) Clock source ******************* 1/2 or 1/16 of timer counter 7 underflow; external pin Serial 2: 8-bit x 1 (transfer direction of MSB/LSB selectable; transmission / reception of 7, 8-bit length) Clock source ******************* 1/2 or 1/16 of timer counter 8 underflow; external pin Serial 3: 8-bit x 1 (transfer direction of MSB/LSB selectable; transmission / reception of 7, 8-bit length) Clock source ******************* 1/2 or 1/16 of timer counter 9 underflow; external pin UART x 2 (common use with serial 0 to 3) I2C x 2 (common use with serial 0, 1; single master)
ATC
4-ch DMA transfer enabled between memory and memory or memory and peripheral register by set interrupt factor and software activation setting Transfer unit: bytes/word Transfer mode: 1 word/burst (max. 128 K bytes) Transfer addressing: source/destination pointer fix/increment High-speed transfer enabled between USB-FIFO and internal RAM in single address mode
I/O Pins A/D Inputs Special Ports Notes
I/O
77
* Common use : 77 (pull-up resistance specifiable)
10-bit x 8-ch. (with S/H) USB ports (D+, D-) 4 multiply PLL built-in, generation of internal 48 MHz at external oscillation 12 MHz
Electrical Characteristics
Supply current
Limit Parameter Symbol Condition min VI = VDD or VSS, output open Operating supply current IDDopr f = 12 MHz , VDD = 3.3 V Pin with pull-up resistor is open Supply current at STOP IDDS all other input pins and Hi-Z state input/output pins are simultaneously applied VDD or VSS level Supply current at HALT IDDH f = 12 MHz , VDD = 3.3 V, output open (Ta = -20C to +70C , VDD = 3.3 V , VSS = 0 V) * "" depends on products. MN102H74D, MN102H74F, MN102H74G: = 0 MN102HF74G: = 1 30+10* mA 70 A 65+10* mA typ max Unit
3
MAE00011DEM
MN102H74D, MN102H74F, MN102H74G
Pin Assignment
NMI * * PA5,SBT0,SCL0 PA4,SBO0,SDA0 PA3,SBI0,AN7 PA2,SBT1,AN6,SCL1 PA1,SBO1,AN5,SDA1 PA0,SBI1,AN4 VDD (VPP) P93,AN3,TM13IOB P92,AN2,TM13IOA P91,AN1,TM12IOB P90,AN0,TM12IOA VSS P84,SBT2,TM11IOB P83,SBO2,TM11IOA P82,SBI2 VSS D- D+ VDD USBMODE P81,TM10IOB,STOP P80,TM10IOA,WDOUT
PB0,IRQ0 PB1,IRQ1 PB2,IRQ2 PB3,IRQ3 PB4,IRQ4 PB5,IRQ5 RST VDD P00,D00 P01,D01 P02,D02 P03,D03 P04,D04 P05,D05 P06,D06 P07,D07 VSS P10,D08,(TM2IO) P11,D09,(TM3IO) P12,D10,(TM4IO) P13,D11,(TM5IO) P14,D12,(TM6IO) P15,D13,(TM7IO) P16,D14,(TM8IO) P17,D15,(TM9IO) 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100
75 74 73 72 71 70 69 68 67 66 65 64 63 62 61 60 59 58 57 56 55 54 53 52 51
50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26
MN102H74D MN102H74F MN102H74G
Support Tool
In-circuit Emulator Flash Memory Built-in Type
PX-ICE102H74-LQFP100-P-1414 Type ROM (x 8-bit) RAM (x 8-bit) Minimum instruction execution time Package MN102HF74G [ES (Engineering Sample) available] 128 K 4K 83.3 ns (at 3.0 V to 3.6 V, 12 MHz) LQFP100-P-1414 *Lead-free
WAIT,P50 RE,P51 WEL,P52 WEH,P53 CS0,P60 CS1,P61 CS2,P62 CS3,P63 TM0IO,BREQ,P64 TM1IO,BRACK,P65 WR,P66 WORD,P67 A00,P20 A01,P21 A02,P22 A03,P23 VDD BOSC,SYSCLK,P54 VSS XI XO VDD OSCI OSCO MODE
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25
CS3S,(TM9IO),SBT3,P72 CS2S,(TM8IO),SBO3,P71 CS1S,(TM7IO),SBI3,P70 CS0S,(TM6IO),A23,P47 (TM5IO),A22,P46 (TM4IO),A21,P45 (TM3IO),A20,P44 VSS (TM2IO),A19,P43 A18,P42 A17,P41 A16,P40 A15,P37 A14,P36 A13,P35 A12,P34 VDD A11,P33 A10,P32 A09,P31 A08,P30 A07,P27 A06,P26 A05,P25 A04,P24
LQFP100-P-1414 *Lead-free * Use 4.7 k to 10 k.
MAE00011DEM
4
Request for your special attention and precautions in using the technical information and semiconductors described in this material
(1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuits examples of the products. It neither warrants non-infringement of intellectual property right or any other rights owned by our company or a third party, nor grants any license. (3) We are not liable for the infringement of rights owned by a third party arising out of the use of the product or technologies as described in this material. (4) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: * Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. * Any applications other than the standard applications intended. (5) The products and product specifications described in this material are subject to change without notice for modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (6) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage, and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products. (7) When using products for which damp-proof packing is required, observe the conditions (including shelf life and amount of time let standing of unsealed items) agreed upon when specification sheets are individually exchanged. (8) This material may be not reprinted or reproduced whether wholly or partially, without the prior written permission of Matsushita Electric Industrial Co., Ltd.
2002 JUL

▲Up To Search▲

Price & Availability of MN102H74G

	To Download MN102H74G Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .